उत्पाद का विवरण
उत्पत्ति के प्लेस: चीन
ब्रांड नाम: E-link
प्रमाणन: CE, FCC
मॉडल संख्या: LNK-PSSE2424G
दस्तावेज: E-link LNK-PSE2424G 24V 24W....0.pdf
भुगतान और शिपिंग की शर्तें
न्यूनतम आदेश मात्रा: 1 टुकड़ा
मूल्य: बातचीत योग्य
पैकेजिंग विवरण: औद्योगिक पीओई स्विच मानक कार्टन पैकेजिंग
प्रसव के समय: 7-10 कार्य दिवस
भुगतान शर्तें: एल/सी, टी/टी, वेस्टर्न यूनियन, मनीग्राम, पेपैल
आपूर्ति की क्षमता: 100000pcs/महीना
परिचालन तापमान:: |
-10 ° C से 50 ° C (14 ° F से 122 ° F) |
वज़न: |
7.0 किग्रा |
आयाम (W × D × H):: |
440 x 235 x 43 मिमी |
PoE (ईथरनेट पर पावर): |
1200W |
मामला: |
धातु का मामला |
बढ़ते विकल्प:: |
19 इंच रैकमाउंट |
परिचालन तापमान:: |
-10 ° C से 50 ° C (14 ° F से 122 ° F) |
वज़न: |
7.0 किग्रा |
आयाम (W × D × H):: |
440 x 235 x 43 मिमी |
PoE (ईथरनेट पर पावर): |
1200W |
मामला: |
धातु का मामला |
बढ़ते विकल्प:: |
19 इंच रैकमाउंट |
Product Advantages
► Output Voltage: 24VDC @ 0.5A
► Storage Temperature: -20C to +70 deg C
► Operating Humidity: 5% to 95% non-condensing
► Input Voltage: 90-260VAC @ 47-63Hz
► Input Current: 0.3A @ 120VAC, 0.2A @230VAC
► Efficiency: 70+%
► Output Ripple: 1% Max
► Switching Frequency: 200kHz
► Line Regulation: +/- 0.5%
► Load Regulation: +/- 1%
► Operating Temperature: -10C to +50 deg C
► Remotely power Equipment Through CAT 5/6 Cable up to 100m (328ft).
► Short Circuit, Over Current and Over Voltage Protection.
Overview
LNK-PSE2424G 24W – 24V Gigabit PoE Injector is a long-distance driving, fast network performing, strong PoE Output midspan. It is a single port indoor PoE injector that can provide up to 24W.
The midspans are ideal to power 802.11 access points, pan-tilt-zoom (PTZ) and dome cameras, IP videophones, thin clients and other power Ethernet end terminals with 24W of power. With plug and-play installation, they are easy and cost effective to implement leveraging existing Ethernet infrastructure while at the same time providing the assurance of a future proof network.
Technical Indexes
|
Standards: |
IEEE 802.3 10Base-T Ethernet |
|
IEEE 802.3u 100Base-TX Fast Ethernet |
|
|
IEEE 802.3ab 1000Base-T Gigabit Ethernet |
|
|
Processing Type: |
Forward |
|
Half-duplex, Full-duplex |
|
|
Forward Filter Rate: |
1,488,000pps (1000Mbps) |
|
Cabling: |
10/100/1000Base-T: Cat5 or above |
|
Maximum Distance: |
PoE (24W): 2-pair UTP Cat. 3, 4, 5, up to 100m (328ft) |
|
Connector: |
LAN: 1 x RJ-45 STP, “Data” Input Port POE: 1 x RJ-45 STP, “Data + Power” Output Port AC Connector: 1 x AC Input power socket, IEC-60320-C15 |
|
Environmental |
|
|
Operating Temperature: |
-10°C to 50°C (14°F to 122°F) |
|
Storage Temperature: |
-20°C to 70°C (-4°F to 158°F) |
|
Relative Humidity: |
5% to 95% non-condensing |
|
MTBF: |
>200,000hrs |
|
Electrical and Mechanical |
|
|
Input Voltage Range: |
90-260VAC @ 47-63Hz. |
|
Output Voltage: |
DC 24V |
|
Power Consumption: |
24 watts max. |
|
PoE (Power over Ethernet) |
|
|
Port: |
RJ45 |
|
Power Pin Assignment |
Data provide over pairs 1/2(+) and 3/6(-) Power over spare pairs 4/5(+) and 7/8(-) |
|
PoE Power Output |
DC 24V/24-watt PoE via 2-pairs |
|
LED Indicators |
|
|
Power: |
Power Status |
|
PoE: |
PoE Status |
|
Dimensions (W×D×H): |
84 x 43 x 31mm |
|
Weight: |
0.25Kg |
|
Casing: |
Plastic Case |
|
Mounting Options: |
Desktop |
|
Regulatory Approvals |
|
|
ISO9001 |
|
Ordering Information
|
Model |
Description |
|
LNK-PSE2424G |
10/100/1000Mbps 24V 24W POE Injector with Power Cord |
